Scanner Indicator Lights - Kodak P811 Guide De L'utilisateur

Rear View
No. Name

Output slot
SD/xD/MMC/

MS Card slot
Bottom View
S c a n n e r I n d i c a t o r L i g h t s
Listed below are the indicator light patterns and the functions they represent:
Status
Power
/Card

 
(orange)



(green)

(green) (color)
All manuals and user guides at all-guides.com
Function/ Description
The scanned original exits from this slot.
Accepts the following types of memory cards: SD, xD, MMC and MS. Also accepts
MICROSD Cards with an SD adapter. (Refer to "Supported Memory Cards" on page 9.)
Blinking slowly
Blinking rapidly

Steadily on

Off

The scanning resolution setting is indicated by color of Status/Card light.
600dpi – The scanner is ready for use in 600dpi mode (default).
300dpi – After scanner is ready in 600dpi mode, press the power button again for
300dpi mode.
 Initializing system and memory card. Please wait until the initialization process is complete before
using the scanner.
 Busy scanning and storing picture files. Please wait until the process is complete before scanning
another original.
Recommend using NiMH rechargeable type batteries. We do not
recommend or support alkaline batteries. For acceptable battery
life, and to make sure your scanner operates dependably, use
recommended batteries.
Customer Support: http://www.pandigital.net/kodaksupport
Battery compartment
takes 4 AAA (UM-4) batteries
(not included)
There is no battery charging
function in this scanner.
7