Suitable And Unsuitable Original Types - Kodak P811 Guide De L'utilisateur


(green) (color)

(color)


(color)
(green)
 
S u i t a b l e a n d U n s u i t a b l e O r i g i n a l T y p e s
Suitable
The scanner is designed to obtain the best scanning results with the following types of originals (without using a plastic
sheath):
 3"x5", 4"x6", 5"x7", 8x10" up to A4/Letter size
 Business cards (standard 3.5"x2" (8.9x5 cm) or larger)
 35mm negatives and slides (1-6 frames 35mm Negative adapter)
Unsuitable
Do not use the following types of originals for scanning. Otherwise the scanner may malfunction or cause the original to
jam in the slot.
 Originals thicker than 1.0mm
 Originals with either side shorter than 55mm
 Originals with lots of black or dark colors
 Originals with dark colors surrounding the edges
 Printed pictures (pictures on newspapers, magazines, etc.)
 Soft and thin materials (thin paper, cloth, etc.)
 Over-exposed film/slides. To avoid auto-detection failure, remove any over-exposed frames from the beginning of the
filmstrip before feeding.
 Over-sized film (i.e., 24x36mm) or professional High Exposure ISO 800+ film may cause the device to malfunction.
 Originals that exceed the following acceptable size:
35mm Negative/Monochrome filmstrips are unsuitable with any of the following conditions:
8 Customer Support: http://www.pandigital.net/kodaksupport
All manuals and user guides at all-guides.com
 Paper jam. Press the Power button. The scanner backs out the original so you can remove the
jammed original from the feed slot in photo scanning mode, and transparency output slot in filmstrip
scanning mode.
 Calibration error. Please contact your nearest service center for help.
No memory card, card full (free space below 10MB), card error, card locked or the file system is not
supported. Remove files from the card to free up space, unlock the card if it is locked, or try another
card.
The battery power is low.
The scanner is turned off.
Width 8.5 inches (216mm)
1. Ends of the filmstrip are taped. Remove the tape and clean any residue of glue before scanning.
2. Ends of the filmstrip have not been cut straight across. Cut the ends straight across before
scanning.
Length: 12 inches (304.8mm)