Orientation Of The Original And Scanned Picture; Operating The Scanner; Preparation And Initial Setup - Kodak P811 Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

O r i e n t a t i o n o f t h e O r i g i n a l a n d S c a n n e d P i c t u r e
It's easy to see how scanned pictures appear on your computer. Note: You can rotate pictures on your computer.
 Scanning the same original in different orientations may produce scanned pictures that look slightly different in color tones and
brightness. This is not a malfunction.
O p e r a t i n g t h e S c a n n e r

Preparation and Initial Setup

The scanner can run on battery power or an external power supply.
 When both power sources are available, the scanner only consumes power from the external power supply.
 Recommended Ni-MH type rechargeable batteries. (There is no battery charging function in the scanner.)
1. Turn the scanner over and slide open the battery compartment cover.
2. Install four AAA (UM-4) batteries. Make sure the batteries are correctly installed according to the markings in
the battery compartment.
3. Replace the battery compartment cover.
4. Connect the plug on the power adapter to the power connector on the scanner.
5. Plug the power adapter into a power outlet.
 The type of power plug and socket illustrated may differ from that of your region.
6. Insert the SD Memory Card (included) or any unlocked (writable) memory card into the memory card slot.
 Always insert a memory card before scanning.
 Make sure the memory card is unlocked (writable)
 The scanner only accepts memory cards in FAT or FAT32 file system. NTFS and other file systems are not
supported.
Turning on the Scanner
1. Press the
information, refer to "Indicator Lights" on page 7.)
2. Wait until the power indicator stops blinking and then turns off. The Status/Card indicator stays on steady,
indicating that the scanner is ready.
 Do not insert an original into the feed slot when the power indicator is blinking; the original will not be
scanned.
10
Customer Support: http://www.pandigital.net/kodaksupport
All manuals and user guides at all-guides.com
Scanner
Original
Scanner
Original
Power
button. The power indicator and Status/Card lights blink. (For more indicator lights
Scanned image when
displayed on-screen

Publicité

Table des Matières
loading

Table des Matières