•
The block splitter is intended only for
private use in the home and garden.
•
The block splitter is intended exclusi-
vely for cutting concrete blocks, tiling
and kerbstones.
•
The applicable accident prevention
ordinances and the other generally
recognized safety-technical rules must
The machine is built according to the
state of the art and the recognized
safety-technical rules. Nevertheless, in-
dividual residual risks can arise during
operation.
•
Injury hazard from moving parts.
•
Moreover, in spite of all preventative
Read through the entire text
of the operating instructions
before startup.
Wear safety glasses while
working with the device.
Wear safety shoes while wor-
king with the device.
Wear work gloves while wor-
king with the device.
Set the cutting blade such that
the cutting lever lies approx.
15° above the horizontal.
Intended Use m
•
•
Residual Risks m
•
Signs m
15
be observed.
The device may be used only with
original accessories and original tools
from the manufacturer.
Any use that goes beyond these terms
is considered improper. The user alo-
ne bears the risk of damages resulting
from such use.
measures being taken, unforeseeable
residual risks can still arise.
Residual risks can be minimized if the
"Safety Notes" and "Intended Use" as
well as the operating instructions as a
whole are observed.
Do not remove any protective
equipment.
Never reach into the moving
parts of the block splitter.
During the work process, never
press the cutting lever in the
opposite direction.
Beware of flying pieces.
Always place the stone material
in the centre of the device.
GB