scheppach Fabrikation von
Holzbearbeitungsmaschinen GmbH
D-89335 Ichenhausen
Block splitter with upper and lower blades
Extension bar for cutting lever
Model
Maximum cutting width
Minimum cutting height
Maximum cutting height
Adjustment of cutting height
Weight
Technical changes reserved
1.
After unpacking, check all parts for pos-
sible transport damages. In the case of
complaints, the carrier must be notified
at once.
2.
Later claims are not recognized.
3.
Check the delivery for completeness.
4.
Familiarize yourself with the machine
by means of the operating instructions
prior to installation.
5.
For accessories as well as expenda-
ble and replacement parts, use only
original parts. Obtain replacement
parts from your dealer.
6.
When ordering, give our article
numbers as well as the type and
model year of the device.
Note:
According to the applicable product liability
law, the manufacturer
of this device is not liable for damages
occurring to or through use of this device
in the case of:
•
improper handling,
Manufacturer
Package contents
Technical Data
General notes
13
HSC130
330 mm
26 mm
140 mm
manual
41 kg
•
failure to observe the operating inst-
ructions,
•
repairs by unauthorized specialists,
•
installation and exchange of repla-
cement parts that are not original,
inappropriate use.
We recommend:
Before installation and startup, read the
entire text of the operating instructions.
These operating instructions should make
it easier to familiarize yourself with your
machine and to use its intended installation
options.
The operating instructions contain impor-
tant notes on how to work with the machi-
ne safely, correctly and economically and
on how to avoid danger, save repair costs,
minimize downtimes and increase the reli-
ability and operating life of the machine.
In addition to the safety requirements of these
operating instructions, it is absolutely impera-
tive that you observe the laws of your country
that apply for the use of the machine.
GB