Ottobock 1K10 Instructions D'utilisation page 6

Größe: , Systemhöhe mit Adapter: , Max. Körpergewicht
[kg]: , Gewicht:
[cm] 12 13 14
[kg] 35
[g]
1K10 – – 120 130 140 155 180 210 230 255
1K30 – – 95
1S30 90 100 –
1 Product description
INFORMATION
Date of last update: 2021-09-14
► Please read this document carefully before using the product
and observe the safety notices.
► Instruct the user in the safe use of the product.
► Please contact the manufacturer if you have questions about the
product or in case of problems.
► Report each serious incident related to the product to the manu­
facturer and to the relevant authority in your country. This is par­
ticularly important when there is a decline in the health state.
► Please keep this document for your records.
1.1 Construction and Function
The 1K10, 1K30 and 1S30 prosthetic feet are suitable for use in both
modular and exoskeletal prostheses. The functional properties are
achieved through the combination of a contoured core and functional
foam.
1.2 Combination possibilities
This prosthetic component is compatible with Ottobock's system of
modular connectors for children. Functionality with components of
other manufacturers that have compatible modular connectors has not
been tested.
6
15 16 17 18 19
45
115 125 175 175 180 200 220
– – – – –
2 Intended use
2.1 Indications for use
20 21
The product is intended exclusively for lower limb exoprosthetic fit­
tings.
2.2 Area of application
• The maximum approved body weight is specified in the technical
data (see page 8).
– –
2.3 Environmental conditions
Storage and transport
English
Temperature range –20 °C to +60 °C (–4 °F to +140 °F), relative
humidity 20 % to 90 %, no mechanical vibrations or impacts
Allowable environmental conditions
Temperature range: –10 °C to +45 °C (14 °F to 113 °F)
Moisture: relative humidity: 20% to 90%, non-condensing
Unacceptable environmental conditions
Chemicals/liquids: fresh water, salt water, perspiration, urine,
acids, soapsuds, chlorine water
Solids: dust, sand, highly hygroscopic particles (e. g. talcum)
Other environmental conditions
UV light
Hydrolysis
2.4 Lifetime
This product has been load-tested by the manufacturer. The maximum
lifetime is 2 years.
3 Safety
3.1 Explanation of warning symbols
CAUTION
Not resistant
Not resistant
Warning regarding possible risks of accident or
injury.