Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Connection and start-up
Application
Green Pointer X2 features:
• Grinding of oxidated or pure tungsten electrodes
• Grinding electrodes with diameters from 1.0 to 4.0 mm
• Variable angle adjustment from 15° to 180°
• Minimizing grinding costs
• Grinding electrodes down to 15 mm length
• Special electrode clamp for electrodes shorter than
15 mm
• Integrated filter to remove the grinding dust
• Suitable for site welding operations
• For exact longitudinal grinding
Technical data &
contents of standard package
Motorydelse:
850 Watt
Power:
230V/50Hz
Rpm:
Adjustable between 14000 min
24000 min
Weight:
2.5 kg
Filter:
Inhalation filter
Diamond wheel: Ø 40 mm
Storage case:
• Green Pointer X2 containing:
- Motor Type WAG40
- Grinding head with filter housing and filter
- Diamond wheel Ø 40 mm
- Electrode holder
- Electrode clamps 1.6; 2.4; 3.2 mm
• Tools:
- Allen key 8 mm
- Allen key 4 mm
- Spanner 13/17 mm
- Spanner 13/14 mm
• Plastic bag to remove the filter
-1
and
-1
Before use
Note: Ensure that the grinding head (2) is centred and tightly
fixed with the allen screw (15) to the motor
How to select grinding position
With the Green Pointer X2 it is possible to select 3 different
grinding positions.
- Unscrew the knurled wheel (22).
- Lift the eccentric plate (20) and turn through 90° to the next
position, place the eccentric plate back in the slide of the
angle adjustment.
- Tighten the knurled wheel (22).
Eccentric plate to select the grinding position
1
(left mark)
Inside grinding
position
Selection of electrode diameter
There are 3 different electrode clamps (1.6, 2.4, 3.2 mm)
supplied with the machine. Unscrew the electrode clamp from
the electrode holder and replace with the required size.
Selection of angle
- Loosen slightly the knurled wheel (22).
- Place the degree sign of the guide (20) at the selected
angle.
- Tighten the knurled screw (22).
Note:
- 15° is the smallest included angle of the electrode, that can
be ground.
- 180° position makes a flat on the electrode point.
- (1 step = 5°)
8
2
3
(centre mark)
(right mark)
s
Centre grinding
Outside grinding
position
position
Publicité
Table des Matières
