General Information - StarLab RM Multi-1 Mode D'emploi

2

General information

Rotator Mixer RM Multi-1 programmable rotator provides:
1) orbital rotational motion,
2) reciprocal motion,
3) vibro motion of the platform in different planes according to the microprocessor protocol.
The protocol enables making not only programs that include mixing motion of one particular
type, but also programs that alternate mixing motions of different types cyclically. The options
for setting are:
Orbital Rotational motion
the platform for a duration of 0-250 seconds or non-stop, with speed of
1-100 rpm.
Reciprocal motion
orbital rotational motion of the platform from the vertical plane is
changing in turns within the limits of the set segment (turning angle 1-90º
for a duration 0-250 seconds, or non-stop) at set speed of the Orbital
rotational motion.
Vibro motion
run inside the borders of reciprocal motion segment. Turning angle 0-5º,
duration 1-5 seconds. It is available only when the reciprocal motion is on.
Pause
segment, when Vibro motion turning angle is set to 0º, and pause duration
is 1-5 seconds. It is available only when the reciprocal motion is on.
Working period
- Ordinary orbital rotational motion (360º) of
- Segment of reciprocal motion when the direc tion
- Segment and duration of the vibro motion of the platform
- Duration of the pause runs inside the borders of reciprocal motion
from 1 min to 24 hours or nonstop.
Reciprocal motion can be started in two modes, tube position
– either horizontal or vertical.
Rotator Mixer RM Multi-1 · Manual ·
5