Publicité
TACH
TACH
x100
x100
r/min
r/min
TACH
TACH
x100
x100
r/min
r/min
TACH
TACH
x100
x100
r/min
r/min
TACH
TACH
x100
x100
r/min
r/min
NOTE:
After the main switch is first turned on all
segments of the display come on as a
5
5
check. The tachometer and trim meter will
4
4
indicate the maximum reading and the
3
3
oil-level indicator and overheat warning
2
2
indicator will light. After a few seconds,
1
1
the meters will change to normal opera-
tion. Watch the meter when turning on
802012
the main switch to make sure all seg-
ments come on.
EMU00136
5
5
Tachometer
4
4
This meter shows the engine speed.
3
3
2
2
EMU01109
Trim Meter
1
1
This meter shows the trim angle of your
802042
outboard motor.
NOTE:
8 Memorize the trim angles that work
best for your boat under different condi-
tions. Adjust the trim angle to the
5
5
desired setting by operating the power
4
4
trim and tilt switch.
3
3
8 If the trim angle of your motor exceeds
2
2
the trim operating range, the top seg-
1
1
ment on the trim meter display will start
to blink.
802015
EMU00138
Oil-Level Indicator
This indicator shows the engine oil level.
5
5
If the oil level falls below the lower limit,
4
4
the warning indicator will start to blink.
3
3
Refer to the sections "FILLING OIL" and
2
2
"OIL LEVEL WARNING" for details.
1
1
1 Oil-level indicator
q
802013
2-20
E
Publicité
Chapitres
Dépannage
