Yamaha 40VEO Manuel D'utilisation page 146

3) For setting the outboard motor at the
partially tilted position, slightly tilt up
the engine until the plate turns com-
pletely
4) To return the engine to the normal
position, put the engine in Neutral,
then slightly tilt up the engine. Set the
tilt-lock lever and shallow water lever
to the lock position and slowly tilt the
engine down.
EMG70311
CRUISING IN SHALLOW
Hydro tilt model
The engine can be tilted up partially to
allow operation in shallow water.
w
8 Place the gear shift in the Neutral posi-
tion before setting for the shallow
water cruising.
8 Return the engine to its normal posi-
tion as soon as the boat is back in
deeper water.
cC
Do not tilt up the outboard motor up to
the cooling water inlet of the lower unit
000832
is higher than the water surface when
setting for and cruising in shallow water.
Otherwise severe damage from overheat-
ing can result.
3-33
WATER
E