Editing Surround Decoders/Sound Field Programs; Selecting A Decoder Used With A Sound Field Program; Setting Sound Field Parameters; Sound Field Parameters - Yamaha RX-V465 Mode D'emploi

Editing surround decoders/sound field programs

Selecting a decoder used with a sound
field program
When using sound field programs for movies or TV
programs, you can select a surround decoder to be used
with the sound field program after setting the parameters
from the following decoders. To set the parameters for
sound field programs, see the following section.
Decoders that can be used with a sound field
program
• PLIIx Movie (PLII Movie)
• Neo:6 Cinema
Note
• The following MOVIE sound field programs cannot be used with a
surround decoder.
– Mono Movie
– Sports
– Action Game
– Roleplaying Game

Setting sound field parameters

Although the field sound programs would satisfy you as
they are with the default parameters, you can arrange
sound effect or decoders suitable for acoustical conditions
of sources or rooms by setting the parameters (sound field
elements).
y
• You can protect the sound field against the changes of parameters the
sound filed parameters when "Memory Guard" of the setup menu is set
to "On" (see page 45). To change the parameters, set it to "Off."
1
Press lSETUP on the remote control.
The setup menu appears on the front panel display.
2
Press nCursor k / n to select "DSP
Parameter" and press nENTER.
The screen changes as follows.
PRM:Sci-Fi
Sound field program
3
Press nCursor l / h to select the sound
field program.
4
Press nCursor k / n to select the parameter
that you want to change, and press nCursor
l / h to change the parameter.
You can change the parameter display in the
following order by pressing nCursor n repeatedly.
• sound field program
• surround decoder
• sound field parameter
For sound field parameters, see "Sound field
parameters" on this page.
38
En
y
• Repeat steps 4 and 5 to change other sound field program
parameters.
5
To end the edit, press lSETUP.
To initialize the parameters of the selected sound field
program, nCursor n repeatedly to select "Initialize"
and then press, nCursor h. When "Press Again h"
appears on the front panel display, press nCursor h
again, press nCursor h to confirm the initialization
or nCursor l to cancel it.

Sound field parameters

y
• The default settings are marked with "*."
CINEMA DSP parameters
DSP Level
Adjustable range: -6 dB to 0 dB* to +3 dB
Fine adjusts an effect level (level of the sound field effect
to be added). You can adjust the level of the sound field
effect while checking sound levels. Adjust "DSP Level" as
follows.
• The effect sound is too soft.
• There are no differences between effects of the sound
field programs.
→Increase the effect level.
• The sound is dull.
• The sound field effect is added too much.
→Reduce the effect level.
Parameters only usable in certain sound
field programs
■
2ch Stereo only
Direct
Auto*/Off
Choices:
Automatically bypasses the DSP circuit and tone control
circuit when an analog sound source is selected as the
input source. You can enjoy a higher quality sound.
Auto Outputs sound by bypassing the DSP circuit and
tone control circuit when the "Bass" and "Treble"
tone controls are both set to 0 dB.
Off Do not bypass the DSP circuit and tone control
circuit.
■
7ch Stereo only
CT Level SL Level
/
SB Level
Adjustable range: 0 to 100%
Adjusts the volume of the center (CT), surround L (SL)
surround R (SR) and surround back (SB) channels in the
7ch Stereo program. The available parameters differ
depending on the setting of the speakers.
SR Level
/ /