Yamaha RX-V465 Mode D'emploi page 40

Setting the option menu for each input source (OPTION menu)
■ Decoder Mode
Input source: HDMI1-4, AV1-4
Auto*/DTS
Choices:
Selects DTS digital audio signals for reproduction.
Auto
Automatically selects audio input signals.
DTS
Selects DTS signals only. Other input signals
are not reproduced.
■ EXTD Surround
Input source: HDMI1-4, AV1-4
Choices: Auto*/PLIIxMovie/PLIIxMusic/EX/ES/
Off
Selects whether to reproduce multi-channel input signals
in 6.1- or 7.1-channel when surround back speakers are
used.
Auto
Automatically selects the most suitable
decoder according to whether a flag for
reproducing surround back channel is present,
and reproduces the signals in 6.1- or 7.1-
channel.
PLIIx
Always reproduces signals in 6.1- or 7.1-
Movie
channel using the PLIIxMovie decoder
whether or not surround back channel signals
are contained. You can select this parameter
when one or two speakers are connected.
PLIIx
Always reproduces signals in 6.1- or 7.1-
Music
channel using the PLIIxMusic decoder whether
or not surround back channel signals are
contained. You can select this parameter when
one or two speakers are connected.
EX/ES
Automatically selects the most suitable
decoder for input signals whether or not the
flag for reproducing surround back channel is
present, and always reproduces signals in 6.1-
channel.
Off
Always reproduces signals in 5.1-channel
whether or not the flag for reproducing
surround back channel is present.
36
En
Signal Info
Input source: HDMI1-4, AV1-4
Displays information on audio and video signals on the
front panel display. You can change items to be displayed
using nCursor k / n.
Signal Info parameters
■
Audio information
Information
Format of digital audio signals.
The number of input signal channels (front/
surround/LFE).
For example, if input signal channels are 3
front channels, 2 surrounds and LFE, "3/2/
0.1" is displayed.
If a channel that cannot be expressed as the
above, a total number of channels such as
"5.1ch" may be displayed.
The sampling frequency of digital input
signal.
The bit rate of input signal per second.
Notes
• "No Signal" is displayed when no signals are input and "---" is displayed
when signals that this unit cannot recognize are input.
• The bit rate may vary during playback.
■
Video information
Information
Format and resolution of video input signal.
Format and resolution of video output signal.
HDMI error information
(appears only when an error has occurred)
Information
Error messages about HDMI signals and
HDMI components.See the following for
details of the error messages.
HDCP Error
HDCP authentication failed.
Device Over
The number of HDMI components
connected is over the limit.
■
FM Mode
Input source: TUNER
Stereo*/Mono
Choices:
Sets FM broadcasting receiving mode.
Stereo Receives in stereo mode.
Mono
Receives in monaural mode. You can get better
reception in Mono mode.
Description
Description
Description