Connecting Speakers - Yamaha RX-V465 Mode D'emploi

Connecting speakers

When you connect speakers, connect them to the respective terminals as follows, according to your speaker layout.
b a
c
DMI 3 3 HDMI 4
SPEAKERS
FRONT
CENTER
AUDIO
OUT
e
■
5.1-channel
Speakers
a Front speaker L
b Front speaker R
c Center speaker
d Surround speaker L
e Surround speaker R
f Subwoofer
SURROUND
SURROUND BACK SUBWOOFER
PRE OUT
d
f
Jacks on this unit
FRONT (L)
FRONT (R)
CENTER
SURROUND (L)
SURROUND (R)
SUBWOOFER
Connecting the surround back speakers
Connecting an external amplifier to the SURROUND
BACK L/R jacks of the PRE OUT terminals allows you to
create the maximum of 7.1-channel surround system with
a surround back channel.
For a 6.1-channel system, connect the external amplifier to
the SURROUND BACK L jack of the PRE OUT
terminals.
For a 7.1-channel system, connect it to the SURROUND
BACK L/R jacks.
Surround Back L/R speakers
External Amplifier
SURROUND BACK L
(white)
SURRUND BACK R
(red)
SURROUND BACK
You can adjust the surround back speaker volume with a
volume control of the external amplifier. To obtain the
balanced sound during playback, set the speaker output
characteristics in advance using the Yamaha Parametric
Room Acoustic Optimize (YPAO, see page 18) or
"Speaker Setup" of the setup menu (see page 41).
Connections
SUBWOOFER
PRE OUT
11
En