Editing Sound Field Parameters; Changing Parameter Settings - Yamaha HTR-5830 Mode D'emploi

Changing parameter settings

The initial sound field program settings will provide you
with an excellent listening experience as they are. But you
can create an original listening environment by altering
some settings.
Note
• The editable parameters vary depending on the sound field
program you select. Refer to the explanation for the parameter.
TEST
VOLUME
PROG
LEVEL
VOLUME
1
Select the sound field program you want to
adjust.
PROG
2
Press u / d to select the
parameters.
3
Press –/+ to change the
parameter value.
y
• If you press and hold –/+ to change the parameter value, the
front panel display automatically stops at the factory preset
parameter momently.
48

EDITING SOUND FIELD PARAMETERS

STEREO
PROG
MUTE
SET MENU
1
2,3
PROG
4
Repeat steps 1 through 3 if you wish to alter
other parameters.
Note
• You cannot change parameter values when "OPTION 2 MEM.
GUARD" is set to "ON". If you want to change the parameter
values, set "OPTION 2 MEM. GUARD" to "OFF" (see page
45).