Publicité
Stopping the Pump
There are no special procedures for switching the pump off; it needs
only to be disconnected from the electric power by means of the
bipolar switch. When the pump is stopped, the anti-suckback device
makes it possible to maintain vacuum in the vessel connected on the
inlet flange of the pump if the tank is hermetically sealed.
Safety Rules
Use the Retention Spring to secure the mains cable into the IEC320 socket.
NOTE
MS120 Single Stage Rotary Vane Pumps (G2571-64000) User Manual/X3702-90000 (A) 173/188
Technical Information
Stopping the Pump
5
Publicité
Chapitres
