Dryer cycles
CA
62
(EN)
Aerosteam Plus
Dryness Level
Drying Temp
Wrinkle Free
Aerosteam
Dryness Level
Drying Temp
Wrinkle Free
* Dryness level is an option available on automatic sensing cycles only. On manually timed or
pre-programed cycles dryness will vary depending on the load and its initial moisture content.
Note: if items are still damp at the end of a steam cycle, select the AIR DRY cycle to finish drying
the items. To freshen towels, heat sensitive, delicate or bulky items, use the AIR DRY cycle only.
Important!
Ensure the water supply to the dryer is connected and turned on before using the AEROSTEAM or
AEROSTEAM PLUS cycles.
DO NOT start an AEROSTEAM or AEROSTEAM PLUS cycle if there is no load in the drum. Make sure
you have loaded the dryer before starting an AEROSTEAM or AEROSTEAM PLUS cycle.
Aerosteam Plus (selected models only)
A cycle with a short burst of heat and steam followed by a fixed period of
air dry (no heat). Designed for larger loads of wrinkled garments and to
freshen items that have been stored. Recommended for 7 – 13 garments.
Not intended for use with towels, heat sensitive, delicate or bulky items.
n/a*
High, followed by no heat
Off
Aerosteam (selected models only)
A cycle with a short burst of heat and steam followed by a fixed period of
air dry (no heat). Designed for 3 – 5 garments or items that are wrinkled or
to freshen items that have been stored. Not intended for use with towels,
heat sensitive, delicate or bulky items.
n/a*
High, followed by no heat
Off