Installation instructions
CA
44
(EN)
Leveling the dryer
Position the dryer near the final location. Adjust the four leveling legs (wind up or down) at the
corners as needed, to ensure the dryer matches the height of the washer and is level from side to
side and front to back. The dryer must rest firmly on all four legs, and not rock in any direction.
Move the dryer to its final location.
1
To ensure the dryer is correctly level from side-to-side, place a spirit level on the top center of
2
the machine. If level, the air bubble will sit between the two lines.
To check whether the dryer is correctly level from front-to-back, open the door to the 90°
3
position, place the spirit level on the top edge of the door and check the bubble sits between
the two lines.
If the dryer is not level in any direction, adjust the height of the appropriate leg(s) until the dryer
4
is correctly level.
4 leveling feet
Level side-to-side
Level front-to-back
Fig.41 Leveling the machine