Fisher & Paykel AeroCare Instructions D'installation Et Guide D'utilisation page 19

Connecting the dryer to the gas supply
Gas connection parts
Ensure you have the following parts before installing the dryer.
New metal flexible
gas line connector
Adapter
Elbow
Pipe size at least ½" (12.7 mm)
Connecting to dryer
Install a female ⁄ " NPT elbow at the gas inlet end of the dryer.
Attach a ⁄ " flare union adapter to the female NPT elbow.
Apply pipe compound to the adapter
and dryer gas inlet threads
Fig.8 Attaching elbow and adapter
Important!
Securely hold on to the end of the dryer gas inlet with a pipe wrench to help prevent twisting
the inlet.
Installation instructions
Adapter
⁄ " NPT
Fig.7 Parts required for gas connection
Using two adjustable wrenches tighten
the flexible gas line connection
Fig.9 Tighten connections
⁄ " NPT pipe plug for
checking gas inlet pressure
Shut off valve
17 CA
(EN)