Dryer Cycles - Fisher & Paykel AeroCare Instructions D'installation Et Guide D'utilisation

Dryer cycles

CA
58
(EN)
Your dryer has a number of DRYING CYCLES that can
be used to dry different types of garments:
All drying cycles default to the recommended options
for that cycle based on the average expected load to
be dried using that cycle. You can vary the options
(eg DRYNESS LEVEL, DRYING TEMP) to create your
desired cycle. Refer to page 72.
Note: some options are not available on some cycles,
for clothes care reasons, or because the option is not
appropriate for the cycle.
To change a drying cycle or options you have selected
after a cycle has started, touch START/PAUSE and
select your new cycle and or settings, then touch
START/PAUSE again to resume the cycle with the new
setting(s). Some options may not be available for
selection under certain conditions and after particular
stages of the cycle have passed.
Always follow manufacturer's care label instructions when drying your garments. If you are
unsure of the temperature to select for a load, it's best to select a cycle with a lower rather than a
higher temperature, eg the DELICATE or EASY IRON cycle instead of the REGULAR cycle.
When drying casual, everyday garments we recommend using the EASY IRON cycle (with DRY
drying temp selected). If this cycle is not offered on your model of dryer, use the DELICATE cycle.
Note: not all cycles and options may be available on your model of dryer. Default cycle settings
are shown.
Regular
Dryness Level
Drying Temp
Wrinkle Free
Regular
A high heat cycle for rapid drying of everyday cottons. This cycle is
suitable for most garments labelled "Tumble Dry".
Dry
High
Off
Fig.48 Drying cycles
DE7027P, DG7027P
Fig.49 Drying cycles
DE7027G, DG7027G