Fisher & Paykel AeroCare Instructions D'installation Et Guide D'utilisation page 11

Unpacking
To ensure the best performance from the dryer, please follow the instructions below.
Excess Weight Hazard
Use two or more people to move and install the dryer.
Failure to do so can result in back or other injury.
Important!
Only remove the packaging at the customer's premises.
This will ensure the appliance arrives in pristine condition and reduces the risk of damage during
transportation to the customer's home.
1. Remove packaging
Remove all of the outer packaging. Dispose of unwanted packaging thoughtfully.
2. Discard packing material from around dryer feet
Tilt the dryer sideways and remove the foam shipping pads by pulling at the sides and breaking
them away from the dryer feet. Be sure to remove all the foam pieces before continuing with
installation.
3. Drying rack (selected models only)
Open the door. Remove the tape holding the drying rack in place. Remove the rack and remove
protective tape from 'legs' of rack.
4. Accessories
Remove the accessories from inside the dryer.
Fig.2 Unpacking your dryer correctly
Installation instructions
WARNING!
9 CA
(EN)