Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8.2. REFRIGERATION SPECIFICATIONS
8.2.1. REFRIGERANT CIRCUIT DIAGRAM
8.2.2. REFRIGERANT CHARGE
Caution
This equipment must be filled with fluorinated gas R410A with greenhouse gas effects covered by the Kyoto
agreement.
The type and quantity of refrigerating fluid per circuit are indicated in § PHYSICAL CHARACTERISTICS, page
10.
The installer and end user will get informed on local environmental regulations for the installation, operation
and disposal of the equipment ; more particularly, for the collection of substances hazardous for the environment
(refrigerating fluid, oil, antifreeze, etc.). A refrigerating fluid, whatever it is, must not be vented. Refrigerating fluids
must be handled by skilled personnel.
Caution
SYSAQUAC units use the R410a fluoro-carbonated fluid, belonging to group 2 as defined in directive
97/23/CE. Considering the maximum operating pressure of these units (42 bar g), they integrate category
2 (or lower) components as defined in directive 97/23/CE.
8.3. ELECTRIC SPECIFICATIONS
Power supply
Maximum current
Fuse rating aM
Total starting current
Power supply
Maximum current
Fuse rating aM
Total starting current
IMPORTANT
These datas are given for guidance only. They must be checked aat commissioning according to prevailing standards.
They depend on the installation and the cables used.
A main fuse must mandatorily be provided on the power supply.
²
Fuses not supplied
²
Cables not supplied
SEE APPENDIX
25
30
400V / 3 + N / 50Hz
A
22.5
24.5
A
25
25
A
64
77.5
118.5
45
55
A
41
45
A
50
50
A
134
141
201.5
11
35
40
32
34
32
40
119.5
65
75
90
400V / 3 + N / 50Hz
59.5
64.5
79.5
63
80
80
206.5
266.5
105
125
87.5
103.5
100
125
313.5
351.5
Publicité
Chapitres
Table des Matières
