Manutention Generalites; Handling With A Forklift - SystemAir SYSAQUAC 25 Manuel D'installation

7.3. MANUTENTION GENERALITES

The good method of handling depends on the model of SYSAQUAC and its final destination.
² Take care to avoid any rough handling or impacts when unloading and moving the appliance.
²
Before hoisting into position, test lift to insure stability and balance. Avoid twisting or uneven lifting
of the units.
² The units shall be carefully inspected before unit installation to make sure this has not happened.
² ll these sections have been inspected before leaving the factory. It is therefore important to insure that
no bolts, screws or other fixing system are loosened or missing before the commissioning.
Caution
Never submit the metal work (panels, posts) of the SYSAQUAC to handling constraints, as only its base
is designed for that purpose.
Caution
Do not tilt the SYSAQUAC during handling, as it would be damaged irreversibly.
Caution
Never move the SYSAQUAC on rollers.
Caution
When handling the SYSAQUAC, beware not to damage the finned coil block. Protect it with cardboard
or particle panels.

7.3.1. HANDLING WITH A FORKLIFT

A forklift can be used to handle the SYSAQUAC 25/30/35/40 units
when palletized.
Place a safety wedge between the unit base and the fork lift
truck to avoid damaging the unit's structure and casing.
When a forklift is used to handle the
SYSAQUAC 45/55/65/75/90/105/125 units, lift
them only along their width.
8