Clearance; Attachment To The Ground - SystemAir SYSAQUAC 25 Manuel D'installation

9.2. CLEARANCE

When choosing the location for the
SYSAQUAC, take care to leave sufficient
free clearance on all sides to ensure
easy access for maintenance work. The
Caution
When several SYSAQUAC units are installed, ensure proper clearance is implemented around the
condensers specific to each machine.

9.3. ATTACHMENT TO THE GROUND

The surface of the floor or structure located under the SYSAQUAC must be flat, and with sufficient strength to
withstand the unit's weight with its full liquid load, and occasional presence of maintenance equipment.
The SYSAQUAC does not require anchoring on the foundations, except in regions exposed to a high earthquake
risk or if the device is installed on a high level on a steel frame.
SYSAQUAC 25/30/35/40
956
For normal applications, rigidity of the SYSAQUAC and the positions of supports allow for an installation minimizing
vibrations. However, the installers can use anti-vibration rubber pads (supplied in option).
When fitting anti-vibration pads, refer to the manual supplied with the kit.
minimum free clearance dimensions indicated must be
observed to ensure both proper system operation and
allow access for maintenance and cleaning.
SYSAQUAC 45/55/65/75/90/105/125
15
1927