Change Invia Liberty Canister And Invia Liberty Tubing - Medela Invia Liberty Mode D'emploi

Change Invia Liberty Canister
and Invia Liberty Tubing
Change Invia Liberty Canister and Invia Liberty Tubing, when the canister is full, by visual
inspection or when alarm sounds, in accordance with instructions on the pump display.
26
1. Provide sterile canister and sterile tubing.
2.
3.
➡
4.
5.
6.
2. Clamp canister tubing.
3.1 Press the Standby button
[ > 3 seconds] and
the pump motor will stop
running.
3.2 Disconnect the canister
tubing from the tubing
connected to the dressing.
3.3 Release and remove canister.
4. Seal used canister with cap.
5. Remove canister tubing in
direction of the arrow.
6. Unpack new canister tubing
and connect to Invia Liberty
Pump. Insert the tubing
base into the pump (straight
push).