Medela Invia Liberty Mode D'emploi page 22

To change the pressure level
To change the therapy mode
22
3. If yes
Press "Yes" [
Press "OK" [
4. If no
Press "No" [
CAUTIONS
Set the pressure level and therapy mode according to
prescribing healthcare professional instruction.
Press the Selection buttons [
5.
6. Press "OK" [
7. To return to the main display, press
CAUTIONS
If the pressure level is not confirmed, the pump will switch
back to the old settings and returns automatically to the main
display after 5 seconds.
Constant mode – C
The pre-selected pressure is built up and kept constant.
8. To change from intermittent mode to constant mode,
press [ ]
"Change to Constant"
Intermittent mode – I
The pre-selected pressure is built up and the pre-selected
time intervals are used.
9. To change from constant mode to intermittent mode,
press [ ]
"Change to Intermittent"
] to confirm.
] to enter the main display.
] to confirm and enter the main display.
] or [
] to confirm and enter the main display.
"Back"
and press "On"
and press
] to set pressure level.
[ ].
[ ].
[ ].
"On"