Change Canister - Medela Invia Liberty Mode D'emploi

Change canister

Change canister when it appears full or when the alarm sounds,
in accordance with instructions on the pump display.
1 Wash hands.
2 Clamp the canister tubing.
3 Press the "Standby" button [
and the pump motor will stop running.
4
5
6
16
> 3 seconds ]
Press release button at the top of the
pump and remove canister.
Seal used canister with a cap located on
the side of the canister.
Unpack new canister, position the feet at
the bottom of the canister into the grooves
at the base of the pump. Push the canister
up and click into the Invia Liberty pump.
CAUTION
Do not use an Invia Liberty canister if
the sterile packaging is damaged.