Ii- Door Reversibility; A- Summary Of Parts; B- Door Reversibility - Eurocave 92 Série Mode D'emploi

5 - i
II - Door reversibility
a – Summary of parts
1 - 2: grommets
3:Torx screws 25
4: upper hinge
5: Door pin grommet
6: Door axis
b - Door reversibility
Your wine cabinet door is reversible. In this way you can change
which way it opens.
• Close the door
• Remove the grommets, see Fig.A.
• Remove the torx screws and the upper hinge.
• Lift and take off the door and put it to one side
• Remove the pin with a spanner (Fig. B).
• Carefully remove the plug with a thin blade and in its place fit the
pin and washer (Fig. B).
• Replace the plug on the opposite side (Fig. B).
• Remove the door catch and screws (Fig. D).
• Locate the foot on the other side of the housing using the screws.
• Turn the door through 180°
WARNING: the glazed doors are very heavy. Take all necessary
precautions not to injure yourself or drop the door. Never place it on
its edges, which may break it.
• Reassemble the lock receiver on the opposite side.
• Position the door onto the pin of the lower hinge. Hold the door
against the door seal.
• Place the pin of the upper hinge in the corresponding slot of the
door.
• Fit the 3 screws. Ensure that the hinge is fixed properly into place,
if not adjust it. See Fig.C.
• Fit the 3 grommets.
In case of solid door reversibility, remove the
EuroCave plate and put it in the high position.
If the plate is damaged, contact your EuroCave
distributor to order a new one.
Fig. C
8
nstalling your Wine CaBinet
2
1
3
Fig. A
Fig. B
Fig. D
5
4
6