Auto-Restart Function; Secondary Function; User Advices - emmeti XECO Serie Manuel D'installation

8. AIR CONDITIONER USE 1. DESCRIZIONE DEI COMPONENTI

8.18 Auto-restart function

The Autorestart function allows the automatic restarting of the air
conditioner.
In the event of an unexpected interruption in supply, the conditioner will
start running again with the same settings as it had before the interruption.

8.19 Secondary function

This function allows the air conditioner to operate if the remote control is
missing or malfunctioning.
 Press the emergency key and Beep will indicate the startup of the air
conditioner..
 During emergency operation, the air conditioner will automatically
select the operating mode (heating or cooling) in response to the
ambient temperature, as in the table. .
 To shut down the air conditioner, press the emergency key again.
Attention!
The dehumidification function cannot be carried out.
ON/OFF

8.20 User advices

8.20.1 Efficiency in Heating mode
- This air conditioner is equipped with a heating pump system which con-
centrate the external air heat with the refrigerant help to heat the inter-
nal space. Therefore heating efficiency of the air conditioner decreases
with the external drop in temperature. When heating efficiency is no
longer enough, please consider another heating system in combination
to the air conditioner.
GB GB
71