Dehumidification Functioning Dry; Automatic Functioning - emmeti XECO Serie Manuel D'installation

8. AIR CONDITIONER USE 1. DESCRIZIONE DEI COMPONENTI
8.5 Dehumidification functioning "Dry"
 Press the MODE key to select the
- +
 Use the keys to set the desired room temperature (16÷30 °C).
The temperature can be set degree by degree.
3 The fan speed on the indoor unit cannot be selected; it will only run
at low speed.
4 By pushing the button please select the desired flaps position.
Note
OFF
Air conditioner modulate the compressor frequency automatically to
maintain the set temperature. If air conditioner works for long periods
with high humidity, it may cause condensation drops on the surface.
Cooling function has the same protections

8.6 Automatic functioning

 Press the MODE key to select the
In AUTO mode the air conditioner automatically selects the
operating mode / in response to the ambient temperature.
Ambient temperature Operating mode
≥
26 °C
≤
22 °C
> <
22 26° C
 Set the desired fan speed by means of the FAN key:
AUTO
Auto* Low
* The fan speed varies according to the preset temperature.
4 By pushing the button please select the desired flaps position.
OFF
66
. operating mode
operating mode.
Automatic set
25° C - Set
20° C - Set
26° C - Set
Medium High
GB GB
AUTO