Pipes And Cables Positioning - emmeti XECO Serie Manuel D'installation

6. INSTALLATION OF THE INTERNAL UNIT
- Pull the cable gently to ensure that cables have been inserted and fixed in
the right way
- After cable connexion never forget to tighten them to the cable gland
Connection cable

6.3 Pipes and cables positioning

Internal/external electric cable and the flexible drain hose have to be
fixed togheter with the refrigerant pipe by using protective scotch tape.
6.3.1 Right side and rear outlet
- Put pipes and connecting cables into the housing compartment of the
pipes which should be put as shown in Fig. H and I.
Pipes into the hole have to be placed as shown in Fig J
Fig. H
Fig. I
6.3.2 Rear exit and left side
Move the flexible drain condensation hose from the right to the left ad shown
Cable gland
in Fig K.
- Loosen the screw that fix the flexible hose to the condensation drain on
the left.
- Slide off the flexible hose from the drain on the left.
- Remove the plug from the drain on the right, therefore plug the drain on
the left.
- Put the flexible hose on the drain on the right.
- Tighten the screw which fix the flexible hose to the condensation drain of
the right.
Fig. K
Pipes into the hole have to be placed as shown in Fig L
Refrigerant
pipe
Electric
cables
Fig. L
Electric
cables
Condensation
Fig. J discharge hose
Bleed
Discharge plug
Condensation
discharge hose
GB GB
Refrigerant
pipe
57