SKYLOTEC DEUS 7300 Instructions D'utilisation page 21

Warranty
All SKYLOTEC products, including DEUS 7300
Series devices, carry certain warranties. Warranty
terms for each product may vary, and warranties
and limitations are subject to state laws. Contact
SKYLOTEC for information on the warranty terms
for a particular product.
Replacement if used in an emergency rescue
Use of any rescue equipment in an emergency
scenario can result in undetectable damage to
ropes, anchorage connectors, and internal hardware
components. If your DEUS 7300 Series descent
device is used in an emergency rescue situation, the
descent device must be removed from service and
inspected by a SKYLOTEC-Certified Maintenance
Center. Your DEUS 7300 Series descent device
will be replaced at no cost with documented
proof of emergency use and documentation of
regular inspections. For more information please
contact SKYLOTEC.
Modifications or alterations
Any modification, addition to, or repair of the
equipment other than authorized by SKYLOTEC is
prohibited due to the risk of impairing the function
of the equipment. This restriction extends to both
DEUS controlled descent devices and to the ropes
that are used with them.
Product obsolescence
There are many reasons why a product may
be judged obsolete and thus retired before the
end of its actual lifetime. Examples include
but are not limited to: changes in applicable
standards, regulations, legislation, development
of new techniques, and incompatibility with other
equipment.
DEVICE MARKINGS
Dry at T<0°C
Device Markings
Device markings must be checked to ensure that
all markings are legible and correct.
Rope Path
DANGER: Failure to
follow instructions may
result in injury or death
Read and follow all
instructions included in
manual
EN CE Certification
Mark
Max Descent Height
Min Temperature
21