SKYLOTEC DEUS 7300 Instructions D'utilisation page 18

5) Check all metal components for corrosion or
deterioration.
6) Inspect the rope in its entirety and replace
if needed. Check end terminations (knots);
check for wear within the end termination;
check surface abrasion of the rope (replace
when 50% of surface fibers are broken);
check for cuts; check the interior of the rope
for soft spots, hard spots or breaks; check for
contamination of the rope due to oil, grease or
dirt.*
7) Keep the device away from sharp edges,
chemicals, UV-radiation, and others.
8) Enter the results of the inspection and
the number of joules of energy the device
absorbed that day in your use log.
Inspection Log
After every period of use (daily, if the device is used in that day), use this log sheet to record and track
inspection results:
DEUS Model # __________________________
Date Inspector
18
Cover Slide Cam
Plate
The brake-cover (the cover opposite the hinged
cover plate) is used to perform periodic internal
inspection and maintenance. This cover is to
be removed only by a SKYLOTEC-Certified
Maintenance Technician. Removal of the brake-
cover by anyone other than a technician trained
and certified by SKYLOTEC voids the warranty
and may lead to injury or death.
Storage and Transport
IMPORTANT: Store in a cool, dry, dark place.
Avoid contact with chemicals. Store without
mechanical stress caused by jamming, pressure,
or tension.
The product must be kept away from direct
sunlight, chemicals, dirt, and mechanical damage.
For this reason, a protective bag or special
storage should be used.
DEUS Serial # ___________________________
Drive Euler Pins
Wheel
Hang Plate Screws Rope