Application; Design And Function - ProMinent DULCOTEST CLE 3-CAN-10 ppm Instructions Complémentaires

These supplementary instructions provide CAN-specific information on the
operating instructions of the DULCOTEST
doubt, the information contained in these supplementary instructions shall
have priority. Information is grouped according to the relevant chapters.
1
Proper use
The sensors with CAN connection may only be connected to the CANopen
bus of DULCOMARIN
IMPORTANT
Do not try to open the adapter! The electronics parts inside might be
damaged!
2
In the upper part of the shaft the amplifier electronics is embedded in a
plastics compound. This amplifier electronics converts the primary sensor
current into a CAN bus signal for the DULCOMARIN
supplied via the CAN bus cable.
Fig. 1:
Design of the
sensor
®
ProMinent

Application

®
II.

Design and function

Application / Design and function
®
chlorine sensors. In case of
Protective cap
CAN connection
Device LED
CAN LED
® II. The voltage is
11