How To Operate - Sonnenkonig 2100 Mode D'emploi

3 How to operate

WÄRMEPILZ ELEKTRO black
EN
Article-no�: 30301012
WARNING: The heater must be properly installed before use. This appliance is equipped with a
heating level.
Connect the patio heater to a grounded 220-240V, 50-60Hz outlet. Do not operate the heater
unless it is in an upright position.
Remote control
•
Press the ON/OFF switch to activate the heater.
•
To operate the heater at 900 W, press the right side button on the remote control.
•
To operate the heater at 1200 W, press the left side button on the remote control.
•
To operate the heater at 2100 W power, press both the left and right side buttons on the
remote control.
•
When the heater is in operation, press the upper button on the remote control once to set the
timer to 30 minutes.
•
When the heater is in operation, press the upper button on the remote twice to set the timer
to 60 minutes.
•
When the heater is in operation, press the upper button on the remote control three times to
set the timer to 90 minutes.
•
When the heater is in operation, press the upper button on the remote control for the fourth
time to stop the timer function.
Touch control on the device
•
Press the ON/OFF switch to activate the heater.
•
Touch the Power button once to operate the heater at 900 W.
•
Touch the Power button twice to operate the heater at 1200 W.
•
Touch the Power button for the third time to operate the heater at 2100 W power.
•
Touch the Power button for the fourth time to turn off the heater.
42