Assembly - Sonnenkonig 2100 Mode D'emploi

The appliance must not be used under the following conditions:
•
In rooms with an explosive atmosphere.
•
In rooms with an aggressive atmosphere.
•
In rooms with a high concentration of solvents.
•
In rooms with an extremely high exposure to dust.
EN
•
Near swimming pools or in a wet area.
•
In case of any questionable operating conditions, it is recommended to contact the Technical
Department at Sonnenkönig or a specialist dealer. If the electric heater is used under inap-
propriate conditions, all warranty claims will be void!
•
When children, inexperienced or disabled people operate the appliance.

2 Assembly

WÄRMEPILZ ELEKTRO black
Article-no�: 30301012
1.
Connect the bottom tube
to the floor by screwing it
together.
2.
Screw the bottom tube
to the middle tube.
3.
Insert the power cable
of the heating head as far as possible
through the cavities and the floor.
4.
Slide the heating head
onto the top tube, align
the thread and tighten the
screw counterclockwise.
WÄRMEPILZ 2100
Article-no�: 30301081
1.
Connect the bottom tube
to the floor by screwing it
together.
2.
Screw the bottom tube to
the middle tube.
3.
Insert the power cable
of the heating head as far as possible
through the cavities and the floor.
4.
Slide the heating head
onto the top tube, align
the thread and tighten the
screw counterclockwise.
40