Sonnenkonig 2100 Mode D'emploi page 43

When the heater is operating
•
Touch the Timer button once to set the timer to 30 minutes.
•
Touch the Timer button twice to set the timer to 60 minutes.
•
Tap the Timer button three times to set the timer to 90 minutes.
•
Touch the Timer button four times to stop the timer function.
WARNING: Although the infrared illuminator is splash-proof, do not use it when it is raining or
wet.
Always disconnect the power cord from the power supply when the unit is not in use.
WÄRMEPILZ 2100
Article-no�: 30301081
•
Connect the power cord to a 13 amp po-
wer supply located in a safe, dry area.
•
The switch on the heating head is used
to control the temperature setting:
(Level 1) for 900 W
(Level 2) for 1200 W
(Level 1 & 2) for 2100 W.
•
The 0 position turns the heater off.
43
EN