Assembly Parts; Assembly Instructions - Sonnenkonig WARMEPILZ CHROME GAZ Mode D'emploi

8 Assembly parts

Tools needed:
• Open end wrenches 10 mm and 13 mm
• Adjustable opening wrenches (2), 20 cm long
• Slip joint pliers, 23 cm long
• Philips screwdriver w/medium blade
• Soap solution (best in a spray bottle) for leak test
Parts supplied:
• Stand with LPG cylinder housing and 3 post brackets.
• 9 Nuts (M6 mm), 9 small screws (M6 x 10 mm), 9 small flat washers (Ø 6 mm), reflector for
assembly.
• 6 large bolts and flange nuts (M6) for support base/main pole assembly.
• 3 medium bolts (M8 x 15 mm) for support legs/stand assembly.
• 3 reflector spacers and wing nuts, 9 large flat washers for reflector and burner unit.
• 3 pcs ground fixer
• 6 pcs M6 x 10 mm ground fixer bolts & nuts

9 Assembly instructions

Step 1
• Put the 3 post brackets onto the base as
shown in the picture.
• Use 3 medium bolts (M8x15) to join the
post brackets and the base.
Bolts
55
GB
Stand
Base