Kränzle HD 9/80 L Mode D'emploi page 16

The nozzle is blocked !
No water but the gauge shows full pressure.
Rinse the hose
through first.
remove the lance and
clean the nozzle.
Remove deep
lying dirt
Check visually whether the
nozzle is clean.
16
Small repairs - Do it yourself!
You should now have
a powerful stream of
water,
Straighten a paper
clip and clean the
nozzle.
Clean out the
nozzle
but if you only
get a few drops
of water from
the lance,
Using the flat spray lance
you only have to clean the
front nozzle.
Clean out the
nozzle
Now it works
as well as
before.