Technical Data; General Technical Data - Seca 704 Mode D'emploi

11.TECHNICAL DATA

11.1 General technical data

Dimensions
• Depth
• Width
• Height
Weight
Temperature range
Height of figures
Power supply
• Batteries
- Supply voltage
- Battery type
• Optional power supply unit (model-
dependent)
- Supply voltage
- Power consumption with wireless module
disabled
- Power consumption with wireless module
activated
- Insulated device, protection class II
(EN 60601-1)
66 •
3. Compare the output content of the calibration
counter with the figure on the calibration counter
sticker.
The two figures must match for calibration to be valid. If
the sticker and calibration counter do not match, verifi-
cation is necessary. Contact your service partner or the
seca customer service department. Should verification
be necessary, the seca calibration counter sticker
shown above will be replaced by the adjacent verifica-
tion sticker to identify the calibration counter reading.
This sticker will be secured with an additional seal by a
person authorised to perform verification. The verifica-
tion sticker is available from the seca customer service
department under the number 14-05-01-886.
Technical data for
seca 704
520 mm
360 mm
930 mm
17 kg
+10° C to +40°C
25 mm
6 x type AA, 1.5 V
approx. 32 mA
approx. 50 mA
9 V
12 V