Seca 360° Wireless Network; Introduction; Seca Wireless Groups; Channels - Seca 704 Mode D'emploi

7. SECA 360° WIRELESS NETWORK

7.1 Introduction

seca wireless groups

0
1

Channels

C1
C2
C3
0
This device is equipped with a wireless module. The
wireless module allows measured results to be trans-
mitted wirelessly for analysis and documentation. Data
can be transmitted to the following equipment devices:
• seca wireless printer
• PC with seca USB wireless module
The
seca 360° wireless
groups. A wireless group is a virtual group of transmit-
ters and receivers. If you wish to operate several trans-
mitters and receivers of the same type, up to 3 wireless
groups (0, 1, 2) can be set up with this device.
The set-up of several wireless groups ensures the relia-
ble transmission of measured values with the correct
address when using more than one examination room
each with similar equipment.
The maximum distance between transmitters and
receivers is approx. 10 metres. This range may be
reduced under certain local conditions, e.g. thickness
and type of wall partitions.
The following combination of devices is possible per
wireless group:
• 1 set of baby scales
• 1 set of personal scales
• 1 length measuring device
• 1 seca wireless printer
• 1 PC with seca USB wireless module
The devices communicate with each other within each
wireless group via three channels (C1, C2, C3). This
ensures reliable, troublefree data transmission.
When you set up a wireless group with the scales, the
device will suggest three channels guaranteeing opti-
mum data transmission. We recommend accepting the
channel numbers suggested.
You can also select the channel numbers (0 - 99) man-
ually, for example if you want to set up more than one
wireless group.
network operates with wireless
seca 360° wireless Network • 57
English