Set Up Wireless Group (Lrn); Activate Wireless Module (Sys) - Seca 704 Mode D'emploi

Activate wireless
module (SYS)
Set up wireless group
The device is supplied with the wireless module disa-
bled. It has to be activated before you can set up a
wireless group.
NOTE:
When the wireless module is activated, the
power consumption of the device will increase.
We recommend using a power supply unit
when operating the device in a wireless net-
work.
1. Switch the device on.
2. Select the menu item "SYS" in the "rF" submenu.
3. Confirm the selection.
4. Select "On".
5. Confirm the selection.
You will leave the menu automatically.
6. If you do not wish to make any more settings, press
the Start key.
The settings will be saved.
The device switches off.
To set up a wireless group proceed as follows:
(Lrn)
1. Switch the device on.
2. Call up the menu.
3. Select the item "rF" in the menu.
4. Confirm the selection.
5. Select the menu item "Lrn" (Learn) in the "rF"
submenu.
6. Confirm the selection.
The wireless group currently selected (here:
wireless group 0 "Id 0") is displayed.
If the wireless group "0" already exists and you wish
to set up another wireless group with this device,
use the arrow keys to select another ID (here:
wireless group 1 "Id 1").
7. Confirm your selection for the wireless group.
The device will suggest a channel number for
channel 1 (here: "C1 0").
You can either accept the channel number sug-
gested or select another channel number using the
arrow keys.
seca 360° wireless Network • 59
English