Safety Signs; Product Identification Label; Main Components - Stiga HT 500 Li 48 Traduction De La Notice Originale

3.1.3 Type of users
This machine is intended for use by
consumers, i.e. non-professional operators.
It is intended for "hobby-related activities".

3.2 SAFETY SIGNS

The machine has various symbols on
it (fig. 2). Their function is to remind
the operator of the correct conduct for
use, with due care and caution.
Meanings of the symbols:
WARNING! DANGER! The
failure to use this machine
correctly can be hazardous
for oneself and others.
WARNING! Read the owner's
manual before using the machine.
Use ear protection
devices and goggles.
Use thick non-slip
protective gloves.
Do not leave the machine in the
rain (or in damp conditions)
PROJECTION HAZARD! Be
careful of flying debris projected
by the cutting means, that
can cause serious injuries to
persons or damage to things.
PROJECTION HAZARD! Keep
any people or pets at least 15 m
away when using the machine.
50' 15 m
Danger of cutting yourself!
Keep hands and feet
away from the blades.
Class II
Dual insulation
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an Authorised Service Centre.

3.3 PRODUCT IDENTIFICATION LABEL

The product identification label
provides the following data (fig. 1 ):
1. CE conformity marking
2. Name and address of Manufacturer
3. Sound power level
4. Article code
5. Type of machine
6. Serial number
7. Year of manufacture
8. Supply voltage
Write the identification data of the
machine in the specific space on the
label on the back of the cover page.
IMPORTANT Quote the information on
the product identification label whenever you
contact an Authorised Service Centre.
IMPORTANT An example of the
Declaration of Conformity is provided
on the last pages of this manual.

3.4 MAIN COMPONENTS

The machine is composed of a series
of main components that have the
following functions (Fig.1 ):
A. Engine: supplies the drive power
to the cutting means.
B. Blade (cutting means): the element
designed to cut the vegetation.
C. Front hand grip: used to handle the
machine and equipped with the safety switch.
D. Rear hand grip: used to handle the machine
and equipped with the main control buttons.
E. Blade protection (for machine
transport and handling): protects against
accidental contact with the cutting
means that can cause serious injuries.
F. Battery (attachment on request, par. 16.1):
device that supplies electric current to the
tool; its specifications and regulations for
use are described in a specific manual.
EN - 5