General Instructions; Safety Instructions - Grammer MSG 10 Mode D'emploi

General instructions

The operating instructions should be read in full before use.
•
The operating instructions should be kept in the vehicle and always be at hand.
•
The driver seat may only be fitted, serviced and repaired by specialist personnel,
•
in accordance with national regulations and the vehicle manufacturer's fitting instructions.
In the event of incorrect assembly and/or repair, all warranty and liability claims shall be
null and void.
The national fitting regulations can be obtained from
company (see dealer directory), or from the vehicle manufacturer.
The functional checks and servicing work should be carried out at least as regu-
larly as vehicle services.
A correctly functioning and individually adjusted driver seat is essential to your health.
•
Take adequate care of your seat and have it serviced regularly to ensure that it functions
correctly.

Safety instructions

When connecting up a fitted seat heater to the vehicle electrical system, pay attention to
•
the information on the rating plate behind the backrest. The seat heater must be fused
separately:
- at 12 V 8 A
- at 24 V 8 A
- at 48 V 8 A
- at 80 V 8 A
To prevent injury to the driver's back, the seat must be adjusted for the driver's weight
•
before use and before every change of driver (not for MSG 10).
To prevent injury, no objects may be placed within the moving area of the driver seat.
•
To eliminate any risk of accident, the settings must be checked to ensure they are cor-
•
rectly engaged before the vehicle is driven.
Adjustments must not be made while driving.
•
If you make any changes to the standard seat (for example fitting parts which are not
•
original parts) it may no longer meet the safety standards to which it is tested.
Functions may be impaired, threatening your safety. For this reason, any change in
design of the seat must be approved by
18
or from agencies of the
.
MSG 10/12/20
GB