Yamaha YZ450F Manuel D'atelier Du Proprietaire page 39

Masquer les pouces Voir aussi pour YZ450F:

YU-33975, 90890-01403

YM-33277-A, 90890-03141 Timing light

YM-4116, 90890-04116

YM-4097, 90890-04097

YM-4117, 90890-04117

YM-4098, 90890-04098

Tool name/How to use

This tool is used when tighten the steering ring nut to

specification.

This tool is used when install the fork oil seal.

Use this tool to remove and install the damper rod.

Yamaha pocket tester

Use this tool to inspect the coil resistance, output

voltage and amperage.

This tool is necessary for checking ignition timing.

Valve spring compressor

This tool is needed to remove and install the valve

This tool is used to hold the clutch when removing or

installing the clutch boss securing nut.

Intake 4.5 mm (0.18 in)

Exhaust 5.0 mm (0.20 in)

This tool is needed to remove and install the valve

This tool is needed to install the valve guide.

SPECIAL TOOLS

Illustration

Chapitres