Electrode Welding (Mma) - GYS TIG 220 DC Mode D'emploi

Program menu access
Thermal protection
Sleep mode

ELECTRODE WELDING (MMA)

CONNECTIONS AND RECOMMENDATIONS
• Connect the cables, electrode holder and earth clamp in the connectors,
• Respect the welding polarities and intensities indicated on the electrodes boxes,
• Remove the electrode from the electrode holder when the machin is not in use.
Adjustable values
TIG WELDING WITH INERT GAS (TIG MODE)
CONNECTIONS AND RECOMMENDATIONS
Connect the earth clamp to the positive connector (+).
Connect the torch to the negative plug (–), the trigger cable and the gas hose.
Ensure that the torch is equipped and ready to weld, and that the consummables (Vise grip, ceramic gas nozzle, collet and collet body) are not
damaged.
TIG WELDING PROCESSES
The grey areas are not useful for this mode.
20
TIG 220 DC / 300 DC
X X
X X
X X
MMA (MMA PULSE)
The grey areas are not useful for this mode.
0 - 100%
TIG
Access to configuration menu (SAVE, JOB, ...)
Standard symbol to indicate the thermal protection state
Sleep mode
The grey areas are not useful for this mode.
0 - 100%
TIG PULSE
EN