Welding In Manual Mode - GYS GYSPOT ARCPULL 200 Mode D'emploi

WELDING IN SYNERGIC MODE (DEFAULT WELDING MODE)
Ring 1.5mm
Fe Gas
+1
message zone de
message
area
To adjust the welding power current (value
To increase or decrease the metal thickness (value
To adjust the other synergic welding settings (material, type and size of electrode, gas), refer to the chapter «Synergic
Settings».
OVERVOLTAGE DEFECT

WELDING IN MANUAL MODE

t I
ms
100 200
COM. DEFECT
message
area
To increase or decrease the arc duration (value
Main Menu
To increase or decrease the arc current (value
> Settings
To adjust the other manual welding settings (current and welding steps duration), refer to the chapter «Manual Set-
Manual Mode
OVERHEATING DEFECT
tings».
Configuration
OVERHEATING DEFECT
MAIN MENU
To access the Main Menu from the Synergic or Manual modes, press the button Menu/Validate
Configuration
> Pregas > 100ms
Main Menu
Postgas 500ms
MOTOR DEFECT
PRESSED KEY
Language EN
Product reset
> Settings
Info
Manual Mode
Configuration
Info
Soft gene V0.0
Hard gene V0.0
Manual Settings
• « Settings » access the welding settings (synergic or manual)
• « Manual Mode » / « Synergic Mode» change the welding mode on the machine (synergic mode <-> manual mode)
Soft gun V0.0
Configuration
• « Configuration » access the advanced settings on the machine (language, gas options, information, etc.)
Hard gun V0.0
> Pregas > 100ms
Postgas 500ms
Press the return button
Start-up > Q = 0
Language EN
Product reset
Info
SYNERGIC SETTINGS
Synergic Settings
> Material > Fe
Manual Settings
Gas
Electrode
THK. elec.
Start-up > Q = 0
20
GYSPOT ARCPULL 200
In Synergic Mode, the time and current for the different phases are selected automatically
t
by the machine.
ms
100
When the machine starts, the Synergic Mode is launched using the settings previously in
2.0
use.
message
OVERHEATING DEFECT
> Settings
Manual Mode
Configuration
In Manual Mode, the time, current and coefficient for the different phases.
A
Access the Manual Mode using the Main Menu.
PRESSED KEY
Configuration
> Pregas Info
Postgas
Soft gene Language
t
ms
Product reset
Hard gene
100
Info
Soft gun
zone de
Hard gun
message
Manual Settings
Start-up
Press the keys G+ and G- to move the section cursor. Select the section by pressing the
Synergic Settings
.
> Material
Gas
Electrode
THK. elec.
to return to the welding screen.
Product reset
Press the keys G+ and G- to move the left cursor (Material, Gas, Type and thickness of the
electrode). Press the keys D+ and D- to modify the values of each item.
:3 sec
Push the Menu/Validate button
ON
to reset
synergic welding screen.
Ring
1.5 mm
Push the return button
I
A
200
area
), use the keys G+ and G-.
), use the keys D+ and D-.
Main Menu
> 100ms
t I
), use the keys G+ and G-.
ms 500ms A
100 100
V0.0 EN
I
), use the keys D+ and D-.
A
V0.0
100
zone de
message
V0.0
V0.0
> Q = 0
> Fe
ON
Ring
1.5 mm
to confirm the synergy settings and return to the
to ignore the settings and return to the Main Menu.
Main Menu
> Settings
Manual Mode
Configuration
Configuration
> Pregas > 100ms
Postgas 500ms
Language EN
Product reset
Info
Manual Settings
Start-up > Q = 0
Synergic Settings
> Material > Fe
Gas ON
Electrode Ring
THK. elec. 1.5 mm
Product reset
:3 sec
to reset
EN
.