Consumption Display Job - Storch SL 1600 HD Mode D'emploi

Consumption display "Job"
Press the button briefly: The display shows you the volu-
me of material processed per job/jobsite/property, or sin-
ce the last reset.
Caution:
This only shows you the consumption at working pres-
sures above 70 bar.
The volume shown here can be deleted after finishing a
property: in display mode, hold down the button until the
value is reset to "0".
Consumption display "Lifetime":
In Job display mode, press the button 1x to switch to
"Lifetime" mode. This shows you the volume of material
processed since the device was first commissioned.
Caution:
This only shows you the consumption at working pres-
sures above 70 bar.
You cannot delete the volume shown in "Lifetime".
Submenu:
You can query the following data in the digital query
modes submenu:
1. Serial number
2. Motor operating hours
3. Last error code
4. Software version
5. Motor identification
Activating the submenu:
1. Relieve the pressure
2. Hold down the button
3. Switch on the device
Original instruction
1. The serial number is displayed
2. To toggle to the motor operating hours display, press
the button 1x
3. To toggle to the error code display, press the button
1x
To delete the error code, hold down the button: "Clear" is
displayed:
4. To toggle to the software version display, press the
button 1x
5. To access the motor identification display, press the
button 1x
And to return to the pressure display, switch the device
off and back on.
190