Chapitre 13 : Connecting To A Wireless Network; Enable Wireless Network Connectivity - Polycom VVX Guide D'utilisation

Connecting to a Wireless Network
Sujets :
•

Enable Wireless Network Connectivity

• Se connecter à un réseau sans fil sécurisé
• Déconnecter un téléphone VVX d'un réseau sans fil
• Retirer un réseau sans fil
You can connect to a wireless network from your USB-enabled VVX phone using the Polycom
wireless network adapter and access all phone services over the wireless network.
Enable Wireless Network Connectivity
You can enable wireless connectivity for your USB-enabled VVX phone using the Polycom
wireless network adapter.
Before setting up a wireless network, make sure that you connect the VVX phone to its power adapter.
You cannot use a wireless network and Ethernet simultaneously to connect VVX phones to your network.
Enabling wireless connectivity automatically disables the Ethernet port.
Re- VVX phones do not support WEP.
mar-
que :
1. Insert the Polycom Wi-Fi wireless network adapter into the USB port of your VVX phone.
2. Select Start.
3. Select Wi-Fi, then select On.
4. Select Yes to reboot the phone.
After the phone reboots, Wi-Fi is enabled.
The phone scans for wireless networks and lists any that are available. If the phone does not
automatically scan, select Scan to manually initiate a Wi-Fi network scan.
On selecting Exit, the prompt window disappears and the phone displays idle screen. During scanning,
when you select Cancel, the phone navigates back to Wi-Fi menu.
Re- The administrator can configure the regulatory domain for your location and radio frequency
mar- bands on which the wireless network operates. If not configured, the phone uses the Global
que : regulatory domain and 2.4 GHz and 5 GHz default radio bands.
Polycom, Inc.
®
Wi-Fi
®
Wi-Fi
75