Ethernet Interface - Alcad 918 Serie Manuel D'utilisation

22.3 Ethernet interface

For this kind of connection, no driver installation is required.
Connect the appliance to the PC with a crossover ethernet cable (available in option, ref. 298504246 by
ALCAD).
Configuration of the connection:
-
Ethernet connection of your appliance to the PC
To change the IP address of your appliance, press
.
The PC software in communication with the appliance must have the same IP address as the
appliance, just like in the example below:
PC software, settle
the address at
192.168.0.165
92
PC Ethernet
network
and then Adjustment
With the virtual digital
keypad, type the IP
address you want, then
validate with ENTER
FSM-640