Measures; Autolock Function - Alcad 918 Serie Manuel D'utilisation

11 Measures

Pressing the MEASURE zone gives access to the MEASURES function.
In this page, you can either perform measurements on a memorized program in the current list (see
chapter « Measurement list »), or change parameters manually, or use the AutoLock function

11.1 Autolock function

This function is design to lock on a digital signal (terrestrial, cable or satellite)
You just have to enter the frequency or the channel (for terrestrial), then press AutoLock, The instrument will
find automatically in few seconds the digital standard, the modulation type and all other parameters of the
signal.
Example for terrestrial, channel 38 (frequency 610MHz):
Example for satellite low vertical polarization, frequency 12581MHz:
48